Footwear

Showing 25–36 of 36 results

Cane: High cane 100% PVC.

Outsole: PVC plastic polymer, rough non-slip texture, suitable for good traction. Easy removal of dirt, because it allows a free flow of liquids.

Lining: internal lining with polyester media and quick drying when washing.

Attributes:

  • Resistance to abrasion and insulation of chemical products
  • 100% waterproof
  • High and piped cane to protect from weeds and bugs, with a high performance in muddy and deep lands.
  • Flexible and lightweight, easy to roll up and carry.

Available colors: black, white

Tennis in white canvas with high boot covers ankle, in fabric, with white laces and white sole.

Code: High tennis

Genre: Unisex

Available colors: blue, black, white

Tennis on white canvas with a low boot is below the ankle, in fabric, with white laces and white sole.

Code:

Genre: Unisex

Available colors: blue, black, white

Upper: Semi greasy leather, lime 1.8-2.0 mm

Safety Toecap: Composite, with European specifications according to EN 12568-S and NTC 2257 standard. Impact resistance 200
+/- 4J. Resistance to compression 15 +/- 0.1 KN.

Lining: Non-woven fabric in 2 mm polyester fibers.

Seams: Fire retardant Kevlar thread.

Lateral: Continuous nylon thread of high tenacity, No 20, excellent elastic recovery, resistant to moisture and abrasion.

Adjusting rod: Zip and Velcro

Sole: Polyurethane (PU) injected, Lightweight, comfortable, characterized

Upper: Semi greasy leather, caliber 2.0 – 2.2 mm

Safety Toecap: In composite plastic, with European specifications according to EN 12568-S / 1998 standard, Impact resistance
200 +/- 4J, numeral 4.1.3. Resistance to compression 15 +/- 0.1 KN. numeral 4.1.4

Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.

Side: Polyester fabric with 5 mm foam. Provides comfort

Eyelets: Plastic, internal diameter 3/16 ”

Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.

Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).

Abrasion: “When all rubber or all polymeric footwear soles are tested as described in NTC ISO 20344, numeral 8.3, the relative volume loss must not exceed 250 mm3″ NTC-ISO 20345 numeral 5.8.3 ” .
Note: the NTC ISO 20344: 2007 method, number 8.3, is equivalent to Method DIN 53516.
Note 2: Typical abrasion values ​​for a PU sole are usually below 100 mm3

Flexion: NTC-ISO 20345 numeral 5.8.4. When non-leather soles are tested in accordance with NTC ISO 20344: 2007, numeral 8.4, incision growth should not exceed 4 mm before 30,000 flexion cycles.

Electrical Resistance: ASTM F 2413-11, numeral 5.5.3.1 – 18000 Volts (rms) at 60 Hz for 1 minute – current of
maximum leak 1 milliamp in dry conditions.
Resistance to Hydrocarbons: NTC-ISO 20345, numeral 5.8.7. When tested in accordance with standard NTC-ISO 20344: 2007, numeral 8.6.1, the increase in volume should not exceed 12%.

Hardness: Between 50 and 60 +/- 5 Shore A

Laces: Polyester, round braid with acetate dropouts. Length 90 cms.

Insole: 3 mm EVA sheet, anatomic, bonded with polyester fabric.

Height: 4 +/- ¼ inches

Weight: average 950 g

Description: 6 “tall boot in corrected flower leather, composite toe cap, Dielectric, Resistant to Hydrocarbons and Fats, Polyurethane sole.

Upper: Cut made of leather, caliber 1.8 – 2.0 mm.

Height: 6 +/- 1/4 inches as required by the standard.

Average Weight: 850 grams.

Lined Cape: Fabric in polyester fibers, caliber 2 mm.

Seams: Continuous thread with nylon of high tenacity double stitching No 40 with elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN 1cN (centiniwton) = 1.02 grams of force.

Safety Toecap: Made of Composite Polymer Resin with impact resistance according to standard EN 12568 -S and NTC 2257 with 200 J against impact and 15 KN against compression.

Buttress: sheet of synthetic fibers with thermo-activated resin, caliber 2 mm. Provides stiffness and firmness to the heel without affecting comfort.

Insole: 3 mm EVA sheet, anatomic, bonded with polyester fabric.

White Evacol clog with non-slip sole

Genre: Unisex

Available colors: navy, black, white

White Evacol clog with non-slip sole.

Genre: Unisex

Available colors: blue, black, white

Black women’s shoes, leather upper 12/14, antiperspirant or permeable lining according to the customer’s needs, internal insole in bonded knitwear No. 1.8, TR, PVC or Spanso sole, reinforcement between insole and sole in Odena No. 1.8, luxury insole antiperspirant produair.

Gender: women

Available colors: black

Upper: Semi greasy leather, caliber 2.0 – 2.2 mm

Safety Toecap: In composite plastic, with European specifications according to EN 12568-S / 1998 standard, Impact resistance
200 +/- 4J, numeral 4.1.3. Resistance to compression 15 +/- 0.1 KN. numeral 4.1.4

Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.

Side: Polyester fabric with 5 mm foam. Provides comfort

Eyelets: Plastic, internal diameter 3/16 ”

Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.

Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).

Abrasion: “When all rubber or all polymeric footwear soles are tested as described in NTC ISO 20344, numeral 8.3, the relative volume loss must not exceed 250 mm3″ NTC-ISO 20345 numeral 5.8.3 ” .

Note: the NTC ISO 20344: 2007 method, number 8.3, is equivalent to Method DIN 53516.

Note 2: Typical abrasion values ​​for a PU sole are usually below 100 mm3

Flexion: NTC-ISO 20345 numeral 5.8.4. When non-leather soles are tested in accordance with NTC ISO 20344: 2007, numeral 8.4, incision growth should not exceed 4 mm before 30,000 flexion cycles.

Electrical Resistance: ASTM F 2413-11, numeral 5.5.3.1 – 18000 Volts (rms) at 60 Hz for 1 minute – current of
maximum leak 1 milliamp in dry conditions.

Resistance to Hydrocarbons: NTC-ISO 20345, numeral 5.8.7. When tested in accordance with standard NTC-ISO 20344: 2007, numeral 8.6.1, the increase in volume should not exceed 12%.

Hardness: Between 50 and 60 +/- 5 Shore A

Laces: Polyester, round braid with acetate dropouts. Length 90 cms.

Insole: 3 mm EVA sheet, anatomic, bonded with polyester fabric.

Height: 4 +/- ¼ inches

Weight: average 950 g

Yellow warrior boots in PVC, 100% waterproof, with steel safety toecap, resistant to hydrocarbons.

Cane: Made of PVC of great strength and flexibility, it offers greater freedom to the movement of the leg.

Hardness: 55 +/- 2 Shore A.

Toe cap: safety toe cap in steel with dielectric coating according to EN 12568-S standard.

Sole: Self-soothing, non-slip sole with ergonomic design and anti-impact heel protection. Hardness 65 +/- 2 Shore A.

Attributes:

  • Rear reinforcement
  • Reinforced buttress for anti-impact protection in the heel
  • Ankle protector.

Black Evacol shoe with non-slip sole.

Genre: Unisex

Available colors: navy, black, white

X
whatsapp