MORE THAN 25 YEARS OF EXPERIENCE DRESSING COLOMBIAN COMPANIES
Upper: Semigraso leather – fatty, caliber 1.8 – 2.0 mm.
Safety Toecap: Made of composite plastic, with European specifications according to EN 12568-S and NTC 2257 standards. Impact resistance 200 +/- 4J. Resistance to compression 15 +/- 0.1 KN.
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.
Side: Polyester fabric with 5 mm foam. Provides comfort
Eyelets: Plastic, internal diameter 3/16 ”
Laces: Polyester, round braid with acetate dropouts. Length 110 cms.
Seams: Continuous nylon thread of high tenacity, No. 20, excellent elastic recovery, resistant to moisture and abrasion.
Resistance 8900 cN. 1cN (centiniwton) = 1.02 grams force.
Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Insole: 3 mm EVA sheet, anatomically shaped, bonded with polyester fabric.
Height: 6 +/- ¼ inches
Average weight: 950 g
Upper: 60% Semigraso leather, caliber 1.8 mm – 2.00 mm 40% High resistance synthetic.
Safety toe cap: Made of SAE 1050 steel strip, with European specifications according to EN 12568-S and NTC 2257 standards. Impact resistance 200 +/- 4J. Resistance to compression 15 +/- 0.1 KN.
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe cap
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.
Eyelets: Metallic, with galvanic black nickel finish, internal diameter 3/16 ”
Sole: Vulcanized, mix of natural and synthetic rubber.
Laces: Polyester, American loom with acetate dropouts. Length 90 cms.
Template: PVC foam bonded with polyester fabric.
Height: 6 + / ¼ inches
Average weight: 1050 g
Upper: 60% leather moccasin, caliber 1.8 – 2.0 mm. 40% High strength synthetic.
Toe cap: Nonwoven fabric in 2 mm polyester fibers with hardener to give firmness at the tip of the shoe.
Laces: Polyester, American loom, Length 90 cms.
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN 1cN (centiniwton) = 1.02 grams force.
Eyelets: Metallic, with galvanic black nickel finish, internal diameter 3/16 ”
Sole: Vulcanized, mix of natural and synthetic rubber.
Counterfort: Sheet of synthetic fibers with thermo-activated resin, caliber 2 mm. It gives rigidity and firmness in the heel without affecting the comfort.
Insole: Non-woven fabric made of polyester fibers, lime. 0.8 mm
Height: 5 +/- ¼ inches
Approx weight: 900 grams
Black Evacol clog with non-slip sole.
Gender: Unisex
Available colors: blue navy, black, white
Lady black heel, leather upper 12/14, antiperspirant or permeable lining according to customer’s needs, internal insole in bonded knot No. 1.8, TR sole, PVC O spanso, reinforcement between insole and sole in odena No. 1.8, luxury insole antiperspirant produaire.
Handles heel 3/2, 4/2, 5/2.
Gender: Women
Available colors: black
Lining: Textile media
Cane: PVC compound for general use with anti fungal agent.
Sole: PVC compound for general use.
Construction: D.I.P. Direct Inject Process = Direct Injection
Design:
Antifungals: They prevent the proliferation of fungi
Attributes:
Ballet capped in Yersilon Canvas, excellent breathability, elastic lining, providing excellent rest and comfort. Outsole in PVC Expanded, anti-slip engraving, light sole.
Available colors: blue, black
Blue navy Evacol clog with non-slip sole.
Genrder: Unisex
Available colors: blue, black, white
Upper: Semi greasy leather-greasy, caliber 1.8 – 2.0 mm.
Safety Toecap: In composite plastic, with European specifications according to EN 12568-S and NTC 2257. Impact resistance 200 +/- 4J. Resistance to compression 15 +/- 0.1 KN.
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.
Side: Polyester fabric with 5 mm foam. Provides comfort
Eyelets: Plastic, internal diameter 3 / 16″
Laces: Polyester, round braided with acetate dropouts. Length 110 cms.
Seams: Continuous nylon thread of high tenacity, N° 20, excellent elastic recovery, resistant to moisture and abrasion. Resistance 8900 cN. 1cN (centiniwton) = 1.02 grams force.
Sole: Direct Injection to the cut in Polyurethane (PU), Bidensity, Lightweight, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Insole: 3 mm EVA sheet, anatomically shaped, bonded with polyester fabric.
Height: 6 +/- ¼ inches
Average weight: 950 g
Tennis shoes in black canvas with high boot covers ankle, in fabric, with black laces and black sole.
Code: High tennis
Genre: Unisex
Available colors: blue, black, white
Black canvas tennis shoes with a low boot below the ankle, in fabric, with black laces and black sole.
Code: Low tennis
Gender: Unisex
Available colors: blue, black, white
Tennis shoes in dark blue canvas in low boot, it is below the ankle, in fabric, with white laces.
Code: Low tennis
Genre: Unisex
Available colors: blue, black, white
Tennis shoes in dark blue canvas in high boot covers ankle, in fabric, with white laces.
Code: High tennis
Genre: Unisex
Available colors: blue, black, white
Upper: Semi greasy leather – semi greasy, caliber 1.8 – 2.0 mm.
Safety Toecap: Made of composite plastic, with European specifications according to EN 12568-S and NTC 2257 standards. Impact resistance 200 +/- 4J. Resistance to compression 15 +/- 0.1 KN.
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe. Side: Polyester fabric with 5 mm foam. Provides comfort
Eyelets: Plastic, internal diameter 3/16 ”
Laces: Polyester, round braid with acetate dropouts. Length 110 cms.
Seams: Continuous nylon thread of high tenacity, No 20, excellent elastic recovery, resistant to moisture and abrasion.
Resistance 8900 cN. 1cN (centiniwton) = 1.02 grams force.
Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Insole: 3 mm EVA sheet, anatomically shaped, bonded with polyester fabric.
Height: 6 +/- ¼ inches
Average weight: 950 g
Upper: Semigraso leather, caliber 2.0 – 2.2 mm
Safety Toecap: In composite plastic, with European specifications according to EN 12568-S / 1998 standard, Impact resistance
200 +/- 4J, numeral 4.1.3. Resistance to compression 15 +/- 0.1 KN. numeral 4.1.4
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.
Side: Polyester fabric with 5 mm foam. Provides comfort
Eyelets: Plastic, internal diameter 3/16 ”
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.
Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Flexion: NTC-ISO 20345 numeral 5.8.4. When non-leather soles are tested in accordance with NTC ISO 20344: 2007, numeral 8.4, incision growth should not exceed 4 mm before 30,000 flexion cycles.
Electrical Resistance: ASTM F 2413-11, numeral 5.5.3.1 – 18000 Volts (rms) at 60 Hz for 1 minute – current of
maximum leak 1 milliamp in dry conditions.
Resistance to Hydrocarbons: NTC-ISO 20345, numeral 5.8.7. When tested in accordance with standard NTC-ISO 20344: 2007, numeral 8.6.1, the increase in volume should not exceed 12%.
Insole: 3 mm EVA sheet, anatomic, bonded with polyester fabric.
Height: 4 +/- ¼ inches
Weight: average 950 g
Upper: Semi greasy leather, caliber 2.0 – 2.2 mm
Safety Toecap: In composite plastic, with European specifications according to EN 12568-S / 1998 standard, Impact resistance
200 +/- 4J, numeral 4.1.3. Resistance to compression 15 +/- 0.1 KN. numeral 4.1.4
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.
Side: Polyester fabric with 5 mm foam. Provides comfort
Eyelets: Plastic, internal diameter 3/16 ”
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.
Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Abrasion: “When all rubber or all polymeric footwear soles are tested as described in NTC ISO 20344, numeral 8.3, the relative volume loss must not exceed 250 mm3″ NTC-ISO 20345 numeral 5.8.3 ” .
Note: the NTC ISO 20344: 2007 method, number 8.3, is equivalent to Method DIN 53516.
Note 2: Typical abrasion values for a PU sole are usually below 100 mm3
Flexion: NTC-ISO 20345 numeral 5.8.4. When non-leather soles are tested in accordance with NTC ISO 20344: 2007, numeral 8.4, incision growth should not exceed 4 mm before 30,000 flexion cycles.
Electrical Resistance: ASTM F 2413-11, numeral 5.5.3.1 – 18000 Volts (rms) at 60 Hz for 1 minute – current of
maximum leak 1 milliamp in dry conditions.
Resistance to Hydrocarbons: NTC-ISO 20345, numeral 5.8.7. When tested in accordance with standard NTC-ISO 20344: 2007, numeral 8.6.1, the increase in volume should not exceed 12%.
Hardness: Between 50 and 60 +/- 5 Shore A
Laces: Polyester, round braid with acetate dropouts. Length 90 cms.
Insole: 3 mm EVA sheet, anatomic, bonded with polyester fabric.
Height: 4 +/- ¼ inches
Weight: average 950 g
Colour: black
Sizes:34-45
Injected construction
Toe: Polycarbonate. Non-metallic.
Upper: 6.0 ”tall smooth leather boot
Insole: In breathable micro-pore material (EVA) 3mm
Adjustment system: Waxed and round laces
Eyelets: Plastics and non-conductive electricity
Buttress: Non-woven fabrics, polyester, and acrylic resins
Neck: Anatomic, high for comfort
Tongue: Waterproof, lined, and padded canvas
Sole: Polyurethane, polyurethane. Bicolor
Tri density: Resistant to hydrocarbons, dielectric, high resistance to work. The coating on the toe for less wear.
Recommendations:
Remove to dirty with a stiff bristle brush, apply a spray that waterproofs the leather and protects it from moisture and dust. These leathers must be dyed to give the color, they can cause stains when they come into contact with moisture. Wash with water and a soft-bristle brush. Dry in the shade. Waxed and round laces.
Upper: Cut made of leather, caliber 2.0 – 2.2 mm.
Safety Toecap: Made of Composite Polymer Resin with impact resistance according to standard EN 12568 -S and NTC 2257 with 200 J against impact and 15 KN against compression.
Linings: Fabric in polyester fibers, caliber 2 mm.
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.
Eyelets: Plastic, internal diameter 3/16 “.
Sole: Polyurethane (PU) injected, Lightweight, comfortable Bidensidad, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Laces: Polyester, Round braided with acetate dropouts. Length 90 cms.
Insole: 3 mm EVA sheet, anatomical, bonded with polyester fabric.
Height: 6 +/- ¼ inches.
Weight: average 1050 g.
Upper: Upper made of Micropiello, caliber 2.0-2.2mm
Height: 5 +/- 1/4 inches as required by the standard.
Average Weight: 750 grams. Upper
Lining: Technical Lining, 2mm gauge.
Sole: Made of light, comfortable single-density polyurethane, resistant to hydrocarbons and fats, non-slip, and dielectric. Due to the design of the footprint, it has an excellent grip offering greater security.
Seams: Continuous thread with high tenacity nylon, double stitching No. 40 with elastic recovery. Resistant to moisture and abrasion. Resistance 4470 CN 1cN (centinuwton) = 1.02 grams of force.
Safety Toe Cap: Made of polymeric resin composite with impact resistance according to EN 12568-S and NTC 2257 with 200 J against impacts and 15 KN against compression.
Buttress: Sheet of synthetic fibers with thermo-activated resin, caliber 2mm. Provides stiffness and firmness to the heel without affecting comfort .
Insole: 3 mm anatomical EVA sheet, bordered with polyester fabric.
Hardness: 60 +/- Shore A according to UNE 59900 NTC 467.
Black men’s office shoes, 14/16 leather upper, anti-perspirant cape lining, insole in bonded knitwear No. 2, PVC or Spanson TR sole, reinforcement between insole and sole in Odena No. 2, insole in antiperspirant produaire .
Gender: Man
Available colors: black
Upper: Leather Loafer Engraved, with reflective tape that allows greater visibility.
Outsole: Polyurethane, Direct Cut Injection, resistant to hydrocarbons, dielectric.
Template: Anatomical, in low density polyurethane.
Toe cap: Non-metallic, Composite material, withstands 1.5 Tons of pressure, withstands 200 Joules.
Blue navy Evacol shoe with non-slip sole
Gender: Unisex
Available colors: navy, black, white
Black Evacol shoe with non-slip sole.
Gender: Unisex
Available colors: navy, black, white
Evacol blue navy shoe with anti-slip sole.
Gender: Unisex
Available colors: navy, black, white