MORE THAN 25 YEARS OF EXPERIENCE DRESSING COLOMBIAN COMPANIES
Upper: Semi greasy leather, caliber 2.0 – 2.2 mm
Safety Toecap: In composite plastic, with European specifications according to EN 12568-S / 1998 standard, Impact resistance
200 +/- 4J, numeral 4.1.3. Resistance to compression 15 +/- 0.1 KN. numeral 4.1.4
Lining: Surfaced: Non-woven fabric in 2 mm polyester fibers. Protects the foot from contact with the toe.
Side: Polyester fabric with 5 mm foam. Provides comfort
Eyelets: Plastic, internal diameter 3/16 ”
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.
Sole: Direct injection to the cut in Polyurethane (PU), Bidensity, light, comfortable, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Abrasion: “When all rubber or all polymeric footwear soles are tested as described in NTC ISO 20344, numeral 8.3, the relative volume loss must not exceed 250 mm3″ NTC-ISO 20345 numeral 5.8.3 ” .
Note: the NTC ISO 20344: 2007 method, number 8.3, is equivalent to Method DIN 53516.
Note 2: Typical abrasion values for a PU sole are usually below 100 mm3
Flexion: NTC-ISO 20345 numeral 5.8.4. When non-leather soles are tested in accordance with NTC ISO 20344: 2007, numeral 8.4, incision growth should not exceed 4 mm before 30,000 flexion cycles.
Electrical Resistance: ASTM F 2413-11, numeral 5.5.3.1 – 18000 Volts (rms) at 60 Hz for 1 minute – current of
maximum leak 1 milliamp in dry conditions.
Resistance to Hydrocarbons: NTC-ISO 20345, numeral 5.8.7. When tested in accordance with standard NTC-ISO 20344: 2007, numeral 8.6.1, the increase in volume should not exceed 12%.
Hardness: Between 50 and 60 +/- 5 Shore A
Laces: Polyester, round braid with acetate dropouts. Length 90 cms.
Insole: 3 mm EVA sheet, anatomic, bonded with polyester fabric.
Height: 4 +/- ¼ inches
Weight: average 950 g
Colour: black
Sizes:34-45
Injected construction
Toe: Polycarbonate. Non-metallic.
Upper: 6.0 ”tall smooth leather boot
Insole: In breathable micro-pore material (EVA) 3mm
Adjustment system: Waxed and round laces
Eyelets: Plastics and non-conductive electricity
Buttress: Non-woven fabrics, polyester, and acrylic resins
Neck: Anatomic, high for comfort
Tongue: Waterproof, lined, and padded canvas
Sole: Polyurethane, polyurethane. Bicolor
Tri density: Resistant to hydrocarbons, dielectric, high resistance to work. The coating on the toe for less wear.
Recommendations:
Remove to dirty with a stiff bristle brush, apply a spray that waterproofs the leather and protects it from moisture and dust. These leathers must be dyed to give the color, they can cause stains when they come into contact with moisture. Wash with water and a soft-bristle brush. Dry in the shade. Waxed and round laces.
Upper: Cut made of leather, caliber 2.0 – 2.2 mm.
Safety Toecap: Made of Composite Polymer Resin with impact resistance according to standard EN 12568 -S and NTC 2257 with 200 J against impact and 15 KN against compression.
Linings: Fabric in polyester fibers, caliber 2 mm.
Seams: Continuous nylon thread of high tenacity, No 40, excellent elastic recovery, resistant to moisture and abrasion. Resistance 4470 cN. 1cN (centiniwton) = 1.02 grams force.
Eyelets: Plastic, internal diameter 3/16 “.
Sole: Polyurethane (PU) injected, Lightweight, comfortable Bidensidad, characterized for being Resistant to Hydrocarbons (R.H.) and Dielectric (D.E.).
Laces: Polyester, Round braided with acetate dropouts. Length 90 cms.
Insole: 3 mm EVA sheet, anatomical, bonded with polyester fabric.
Height: 6 +/- ¼ inches.
Weight: average 1050 g.
Jean indigo strectch 10.7 ounces, with five pockets, with copper clasp and 2 brass metallic knock buttons.
Fabric: Indigo strectch 10.7 Ozs.
Composition: 9.3 oz, 84% cotton – 14% polyester – 2% elastomer
Gender: Women
Available colors: blue
Indigo Available colors:
Rigid linen trousers for women, with 8 cm wide waistband, with straight boot, imitation pocket, decorative pockets, without belt loops. Nylon zipper, 2 buttons on the waistband.
Fabric: Rigid linen.
Composition: 100% polyester.
Gender: Women
Available colors:
Fluid repellent short sleeve V-neck scrub top. Elastic waist pant, no pockets.
Gender: Women – Men
Fabric: Fluid repellent
Composition: 100% Polyester
Available colors:
Care tips:
Windbreaker antifluid jacket, with inner mesh lining, with internal hood and zipper to store, resortada in the cuffs and tubular in the bottom. Zipper in nylon.
Fabric: Antifluid.
Composition: 100% polyester. 100% polyester mesh lining
Gender: Man
Available colors:
Fluid repellent napped lining jacket, no filling, internal hood with zippered pocket, elastic cuffs, and tubular bottom.
Gender: Men
Fabric: Fluid repellent
Composition: 100% polyester. Napped lining.
Fluid repellent Available colors:
Care tips:
Safety T-shirt in lightweight drill 6 oz., with soft finish, with two-color reflective tapes of 2″ in front, back and arms in polyester, military collar with zipper, without pockets. Nylon zipper of 20cm long.
Fabric: Drill sinai 6 oz.
Composition: 100% cotton
Gender: Unisex
Available colors:
Care tips:
Ribbons color:
Fluorescent high visibility vest, 2-inch gray reflective tape, front Velcro closure, and no pockets.
Gender: Unisex
Fabrics: Fluorescent fluid repellent
Composition: 100% Polyester
Available colors:
Care tips: